Place the input .igs file in the "file" folder before running this command.


Radius Dimension Parameters

NOTE:  When changing radius values, also modify the arc end points.

       For example, with a right angle fillet and the following
       parameters:

         r1=.125

         x1=.500		! Location of arc end tangent to horizontal line
         y1=.375
         z1=.000

         x2=1.500		! Location of arc end tangent to vertical line
         y2=2.000
         z2=.000

       Change the parameters to:

         r1=.150		! Any Desired value

         x1=.500-(r1-.125) ! The first "-" may need to be "+"


       paramter of r1 = .125, suppose it is desired to set
       set r1 = .150.