!   TITLE:  ms_qt.parm
!
!---------------------------------------------------------------------------
!       Rev -   RELEASED    07/24/2001      J. Rinaldi
!---------------------------------------------------------------------------
!
!   This is the parameter file used in the construction of the CRES 410
!   mirror support, 'mirror_support.mac', SK400A007.
!
!
!---------------------- a.) Title and Units Declaration --------------------
!
/title,AAAV Mirror Support Construction / SK400A007 / CRES 410
!
/units,bin                      ! British/inch units
!
!--------------------- b.) Part Name Selection Variable --------------------
!
name='mir_supt'
arry_nam='mirsp'
!
!--------------------------- c.) Model C.S. Names --------------------------
!
ct_name='CSmirsp0'                      ! cartesian
cyl_name='CSmirsp1'                     ! cylindrical
sph_name='CSmirsp2'                     ! spherical
!
!----------------------- d.) Material and Element Type ---------------------
!
mat_select,'c410'                       ! Material Properties
!
!
et,1,shell93                            ! Element Types
et,2,solid95
et,3,solid92
!
!--------------------------- e.) Model Parameters --------------------------
!

thick=.15                   ! Typical wall thickness

l1=7.125-2.336              !----- See figure 1. -----
l2=2.336+2.450
l3=1.45         !1.004
l4=1.45         !1.006
h1=3.800/2
h2=h1
phi1=13.4
!
h3=1.280                    !----- See figure 2. -----
h4=0.755        !was .780
phi2=9
dlj=2.150
drj=1.070
d1=0.9839
d2=0.755
d3=0.8536
d4=0.4990
extd1=dlj
!
ribw=0.200                  !----- See figure 3. -----  ! 0.200
lrext=4.336
llext=4.364
!l5=lrext
l5=2.336+2.45-thick
l6=3.636
l7=l6-ribw
l8=2.736
l9=l8-ribw
l10=1.55    ! 1.836
h5=.350     ! 0.360
h5a=.1      ! Opposite from mirror
h6=.075     ! 0.200
h6a=.350/2  ! Opposite from mirror
h7=.150     ! 0.420  ! Thickness at pocket bottoms
h7a=.7
phi3=0      ! 5
rfil=.060
!
l11=1.000   !0.800                  !----- See figure 4. -----
l12=1.000   !1.200
h8=0.625
h9=3.220
phi4=60
dcut=0.220
!
l13=0.825                   !----- See figure 5. -----
l14=2.975
h10=0.120
chmf1=0.225
chmf2=0.100
phi5=30
!
l15=2.614                   !----- See figure 6. -----
l16=1.300
rrad=0.250
!
dos=2.000
dhole=1.95          ! was 1.025
dbore1=2.5          ! was 1.754
dbore2=dos-.2       ! 1.612     ! use in:    elev_reslvr_adaptor.mac
h11=0.909           ! was .935
l17=0.324           ! was .439
!
boredpth=h11-l17
extd2=5.366-l1
extd3=0.322
extd4=0.532
!
l18=0.340
l19=.054
l20=0.789-l18-l19
l21=1.465-0.789
l22=5.044
!
l23=0.3220125
l24=0.3170125
l25=10.008
!
extd5=l25-l22-l2
!
xcenter=2.336               ! X distance from -Z- to center hole
xbandj=7.125                ! X distance from -Z- to cast band journal
tside=-xbandj+xcenter+l22+extd3-extd4 ! Thickness of flange by the band journal
!
! Hole pattern on the back - added to allow balancing of elev axis
hdia=.688
hdepth=.190
*dim,xh,array,3
xh(1)=2.5
xh(2)=3.5
xh(3)=4.375
yh=.50
!
! Additional cut on back to clear increased size gimbal with the larger
! torquer stator
!
width1=L3+L4    ! 2.8       ! 3.000
depth1=.295
ycut=h2         !.096
rcut=.125
cham1=.250


!------------------------- 3.6.3 Center cut (extrude)
!
! Radius Dimension Parameters
!
! Refer to tools/README.getiges for help on changing radius
! parameter values.
!

ccDr1=1.1250                 ! Used for lm + 4
ccDr2=0.60000E-01            ! Used for lm + 6
ccDr3=ccDr2                  ! Used for lm + 7
ccDr4=ccDr2                  ! Used for lm + 8
ccDr5=ccDr2                  ! Used for lm + 9
ccDr6=ccDr2                  ! Used for lm + 10

!
! Keypoint Parameter Definitions
!

ccPx1=1.300000
ccPy1=0.2100000
ccPz1=0.000000

ccPx2=ccPx1
ccPy2=1.690000
ccPz2=ccPz1

ccPx3=0.2100000
ccPy3=1.750000
ccPz3=ccPz1

ccPx4=1.240000
ccPy4=ccPy3
ccPz4=ccPz1

ccPx5=0.1500000
ccPy5=1.166244
ccPz5=ccPz1

ccPx6=ccPx5
ccPy6=ccPy2
ccPz6=ccPz1

ccPx7=1.107194
ccPy7=0.1993671
ccPz7=ccPz1

ccPx8=0.1993671
ccPy8=1.107194
ccPz8=ccPz1

ccPx9=0.4440892E-15
ccPy9=0.3330669E-15
ccPz9=ccPz1

ccPx10=1.166244
ccPy10=0.1500000
ccPz10=ccPz1

ccPx11=ccPx4
ccPy11=ccPy10
ccPz11=ccPz1

ccPx12=ccPx3
ccPy12=ccPy5
ccPz12=ccPz1

ccPx13=ccPx10
ccPy13=ccPy1
ccPz13=ccPz1

ccPx14=ccPx4
ccPy14=ccPy1
ccPz14=ccPz1

ccPx15=ccPx4
ccPy15=ccPy2
ccPz15=ccPz1

ccPx16=ccPx3
ccPy16=ccPy2
ccPz16=ccPz1

ccDext=.435

!
Troom=70                ! [deg F] Room temp (zero thermal stress)
Ttest=-40               ! [deg F] Test temp
!
!------------------------ f.) Model C.S. Coordinates -----------------------
!
acs=CSra0                       ! active coordinate system
!
xc=0                            ! x coordinate center
yc=h11                          ! y coordinate center
zc=-L22                         ! z coordinate center
!
rotxyc=90  ! -90                ! z axis (xy rotation)
rotyzc=180 ! 0                  ! x axis (yz rotation)
rotzxc=-90 ! 90                 ! y axis (zx rotation)
!
!---------------------------------------------------------------------------