!   TITLE:  gimbal_al_slv_fix.parm (AAAV)
!
!---------------------------------------------------------------------------
!   Rev -       10/07/2002      J. Rinaldi
!---------------------------------------------------------------------------
!
!   This is the parameter file used in the construction of the ALUMINUM
!   azimuth gimbal of the AAAV, 'gimbal_al_slv_fix.mac'.
!
!
!---------------------- a.) Title and Units Declaration --------------------
!
/title,AAAV Gimbal / Aluminum / Sleeve Version
!
/units,bin
!
!--------------------- b.) Part Name Selection Variable --------------------
!
name='gimb_slv'
arry_nam='gslv'
!
!--------------------------- c.) Model C.S. Names --------------------------
!
ct_name='CSgim0'            ! cartesian
cyl_name='CSgim1'           ! cylindrical
sph_name='CSgim2'           ! spherical
!
!----------------------- d.) Material and Element Type ---------------------
!
!
mat_select,'ala356'                 ! Material Properties
!
!
et,1,shell63
et,2,solid45
et,3,solid95
et,4,solid92
et,5,shell93
!
!--------------------------- e.) Model Parameters --------------------------
!
dhubo=4.925
dhubi=1.625*2
rfil=0.060
!
l1=0.425
l2=0.445
l2___=.575
l3=2.042
l4=2.825
l5=4.680
!
l6=4.505
l7=3.623
l8=1.250
l9=0.562
l10=1.658
!
phi1=16
!
l11=5.961       ! Cast surface (5.911 machining)
l12=3.079
l13=3.900
l14=3.439
l15=11.866      ! Cast surface (11.866 machining)
!
phi2=45
!
l16=1.913
l17=1.261
l18=0.250
l19=4.314
l20=1.078
!
dlftj=2*1.130       ! mating assembly parameter
angoffst=rtangle/2
rcapi=dlftj/2
rcapo=1.735
rfilcap=0.125
!
l21=0.502
l22=4.474
l23=0.421
l24=0.500
l25=0.171
!
l26=0.259
l27=0.150
l28=0.187
l29=0.100
!
phi3=80
wbc=1.235           ! width of bearing cap
phi4=9
phi5=20
l30=1.234
!
l31=0.298
drtj=1.868*2
drtbore=2.260
phi6=62
l32=0.694
!
l33=1.013
l34=0.562
l35=4.054
l36=4.738
l37=0.500
!
l38=4.504
phi7=20
l39=0.466           ! 0.466 or 0.621
l40=0.380
l41=0.166
!
rfil2=0.500         ! left web dimensions
phi8=62
l49=0.694
l50=5.00
l51=3.591
!
l52=2.321
l53=4.642
l54=3.640
l55=0.488
w_web=0.150
!
l56=3.892
l57=3.650
l58=1.389
l59=1.250
l60=2.825
!
rfil1=0.500
rfil3=0.625
rfil4=0.500
l61=1.200
l62=2.014
!
l63=0.695
rmnt=0.750/2
l64=1.112-.05       ! Machined dimension (1.112 is the cast dim)
l65=0.348
r1=0.800
!
l66=2.654
l67=1.000
l68=l50-0.360
l69=2.500
rfil5=1.300
!
l70=2.300
l71=4.000
l72=1.573
l73=0.555
l74=0.200
!
phi9=55
!
r_top=5.000/2
l75=0.019
!
d4=1.870
d5=2.686
d6=d5-.200          ! C'bore for lower sleeve
d_stator=.570       ! Used to position torquer stator and its clamp
!
!
A01=45
!
r2=4.4233/2         ! radius parameters
r3=r2-0.279
r4=2.9230/2
!
!d1=0.845           ! depth parameters
d1=0.850            ! depth parameters
d2=d1+((r3-r4)/tan(A01*rconv))
d3=d2+3.00
!
!
r5=2.549/2
r6=2.3400/2         ! Open up for lower sleeve (2.1657/2)
r8=1.495            ! Clearance counter bore for lower sleeve
!
r7=3.250/2
l76=0.955
l77=1.246
l78=1.565
phi10=15
!
phi11=60
l79=0.962
l80=3.900
l81=0.555
l82=1.900
l83=2.315
!
d8=2.7401
d9=2.5628
!
! Machined cuts
!
l84=5.911           ! Torquer end
l85=5.855           ! Resolver end
l86=0.015
!
Dgb01=4.4263
Dgb02=4.088
Dgb03=3.231
Dgb04=2.6715
!
Dgbz01=0.711
Dgbz02=1.122
Dgbz03=2.815
Dgbz04=1.313
Dgbz05=1.869
!
Dcgb01=0.070
Rgb01=0.075
Rgb02=0.050
Rgb03=1.565
!
Agb01=30
Agb02=15
!
dphole=0.0618
!
!------------------------ f.) Model C.S. Coordinates -----------------------
!
acs=0                           ! active coordinate system
!
xc=1.00                         ! x coordinate center
yc=2.00                         ! y coordinate center
zc=3.00                         ! z coordinate center
!
rotxyc=0                        ! xy rotation
rotyzc=-rtangle                 ! yz rotation
rotzxc=0                        ! zx rotation
!
!---------------------------------------------------------------------------