!   TITLE:  gimbal_cres_mach.parm (AAAV)
!
!---------------------------------------------------------------------------
!       Rev -   07/23/2001      J. Rinaldi
!       Rev A   05/02/2002      D. Edwards
!               Added c'bore on resolver end and face cut on torquer end.
!---------------------------------------------------------------------------
!
!   This is the parameter file used in the creation of the machining features
!   of the CRES azimuth gimbal of the AAAV, 'gimbal_cres_cast.mac'.
!
!---------------------- a.) Title and Units Declaration --------------------
!
/title,AAAV Azimuth Gimbal - Machining / CRES 410
!
!--------------------------- b.) Model Parameters --------------------------
!
r2M=4.3757/2            ! radius parameters
r3M=1.637               ! r3=r2-(d2-d1)*tan(60*rconv)
r4M=2.795/2
r5M=2.377/2
r6M=2.344/2
rbM=2.1657/2            ! Open up for lower sleeve (2.1657/2)
!
d1M=0.590               ! depth parameters
d2M=0.905-0.050         ! d2=0.905
d3M=1.080
d4M=d3M+0.570
d5M=1.860
!
d8M=2.5628
d9M=2.5701
!
Dr01M=0.030
D02M=1.3501             ! SK400A008, 1B2
D03M=1.360              ! SK400A008, 1B2
D04M=1.0238             ! SK400A008, 3C7
D05M=0.750              ! SK400A008, 3C7
!
R01M=1.058              ! SK400A008, 1B2
R02M=1.900              ! SK400A013, 1B4    (Rev A)
!
Dx01M=0.185
Dx02M=5.830             ! SK400A008, 3D6
Dx03M=5.911             ! Torquer end       SK400A008, 1C6
Dx04M=5.855             ! Resolver end      SK400A008, 1C5
Dx05M=0.450
!
Dy01M=2.110
Dy02M=0.178
!
Dz01M=0.050             ! C'Bore depth  SK400A008, 3D6
Dz02M=3.560             ! SK400A008, 3C6
Dz03M=3.952             ! SK400A008, 3C6
Dz04M=0.093             ! SK400A008, 3C6
!
A01M=14
A02M=30