!   TITLE:  str_tube_slev_375a080.parm (ISS)
!
!---------------------------------------------------------------------------
!       Rev -   11/06/2000      J. Rinaldi
!---------------------------------------------------------------------------
!
!   This is the parameter file used in the construction of the stator
!   tube sleeve, P/N 375A080;  Used by part macro STR_TUBE_SLEV_375A080.MAC.
!
!
!--------------------- a.) Part Name Selection Variable --------------------
!
name='stat080'
arry_nam='stt80'
!
!--------------------------- b.) Model C.S. Names --------------------------
!
ct_name='CSstr0'        ! cartesian
cyl_name='CSstr1'       ! cylindrical
sph_name='CSstr2'       ! spherical
!
!---------------------------------------------------------------------------
!
tol1=0.005              ! tolerances relevant to analysis
tol2=0.0005
tol3=0.003
tol4=0.002
!
rfil1=0.010             ! fillet radii
rfil2=0.005
rfil3=0.312+tol1-.040
rfil4=0.020
rfil5=0.015
rfil6=0.125
rfil7=0.093
rfout=2.000             ! outer radius of the flange (pattern 1)
rff=0.250               ! flange fillet radius
!
chmf1=0.040             ! chamfer dimensions
chmf2=0.062
chmf3=0.125
!
h1=0                    ! distance of features along +z axis
h3=0.150
h4=0.115
h5=0.358
h2=h5-h4-h3
h6=0.188
h9=0.318
h7=h9-h6
h8=0.443
h10=0.054
h11=0.056+.050
h12=(2.280-tol1)+h5
h13=(2.227+tol4)+h5-.040
!
rbp=2.000               ! radius of bolt pattern
rbf=0.295               ! radius of bolt flange
dbh=0.194               ! diameter of bolt hole
rbh=(dbh/2)+.070        ! radius of bolt heads
dfl=2.500               ! flange diameter
nh=6                    ! number of flange holes
ptang=rtangle           ! total angle of hole pattern
bang=60                 ! bolt pattern angle
!
r1=2.250/2              ! radial distances from z axis
r2=2.400/2
r3=2.498/2
r4=rbp+rbf              ! r4 measured at outer bolt flange
r5=3.461/2
r6=1.893/2-tol2/2
r7=1.863/2+tol3/2-0.001
r8=3.256/2
r9=3.112/2