/nopr
/COM,ANSYS REVISION  5.6   
/NOP
/COM,Internal UNITS set at file creation time = SI   (MKS)
/COM,M19 Steel
/COM,********* Typical B-H properties for demo purposes *********
TBDEL,ALL,arg1
MPDEL,ALL,arg1
TB,BH  ,arg1 ,   1,  26
tbdel,bh,arg1
tb,bh,arg1,,25
TBPT,,  0   , 0
TBPT,,  21.0   ,.07
TBPT,,  38.58   , .26
TBPT,,  49.09   , .43
TBPT,,  63.09   , .67
TBPT,, 77.09   , .86
TBPT,, 105.01   , 1.12
TBPT,, 143.99   , 1.29
TBPT,, 192.52   , 1.39
TBPT,, 280.03   , 1.47
tbpt,, 357.20   , 1.50
tbpt,, 473.50   , 1.53
tbpt,, 627.68   , 1.55
tbpt,, 669.85   , 1.56
tbpt,, 1137.63  , 1.59
tbpt,, 1877.49   , 1.63
TBPT,, 3054.89   , 1.68
TBPT,, 4168.66   , 1.72
tbpt,, 5696.10   , 1.76
tbpt,, 7016.71   , 1.80
tbpt,, 8353.22   , 1.83
tbpt,, 9705.65   , 1.86
tbpt,, 10978.52  , 1.88
tbpt,, 12171.84   , 1.91
tbpt,, 13444.71   , 1.93
tbpt,, 14876.59   , 1.95




/gopr