/nopr
/COM,ANSYS REVISION  5.6   
/NOP
/COM,Internal UNITS set at file creation time = SI   (MKS)
/COM,M27 Steel
/COM,********* Typical B-H properties for demo purposes *********
TBDEL,ALL,arg1
MPDEL,ALL,arg1
TB,BH  ,arg1 ,   1,  40
tbdel,bh,arg1
tb,bh,arg1,,22
TBPT,,    47.7    , .20
TBPT,,    63.7    , .40
TBPT,,    79.6    , .55
TBPT,,   159.1    , .92
TBPT,,   318.3    ,1.15
TBPT,,   477.5    ,1.235
TBPT,,   636.6    ,1.280
TBPT,,   795.8    ,1.3
TBPT,,  1592.     ,1.42
TBPT,,  3183.     ,1.505
tbpt,,  4775.     ,1.55
tbpt,,  6366.     ,1.593
tbpt,,  7958.     ,1.63
tbpt,, 15915.     ,1.775
tbpt,, 31831.     ,1.9
tbpt,, 47746.     ,1.94
tbpt,, 95493.     ,2.02
tbpt,,190986.     ,2.134
tbpt,,381972.     ,2.386
tbpt,,763944.     ,2.88






/gopr