/nopr
/COM,ANSYS REVISION  5.6   
/NOP
/COM,Internal UNITS set at file creation time = SI   (MKS)
/COM,M50 Steel
/COM,********* Typical B-H properties for demo purposes *********
TBDEL,ALL,arg1
MPDEL,ALL,arg1
TB,BH  ,arg1 ,   1,  30   !  
TBPT,,  318.3    ,  .97
TBPT,,  477.5    , 1.22   ! 2
TBPT,,  636.6    , 1.34
TBPT,,  795.8    , 1.42   ! 4
tbpt,,  1592.    , 1.57
tbpt,,  3183.    , 1.69   ! 6
tbpt,, 4775.     , 1.75
tbpt,, 7958.     , 1.816
tbpt,, 15915.    , 1.9    ! 9
tbpt,, 31831.    , 1.984
tbpt,, 47746.    , 2.02
tbpt,, 95493.    , 2.116
tbpt,,190986.    , 2.284
tbpt,,381972.    , 2.55
tbpt,,763944.    , 3.07



/gopr